Exact solutions of functionally graded piezoelectric material sandwich cylinders by a modified Pagano method

The three-dimensional (3D) coupled analysis of simply-supported, functionally graded piezoelectric material (FGPM) circular hollow sandwich cylinders under electro-mechanical loads is presented. The material properties of each FGPM layer are regarded as heterogeneous through the thickness coordinate, and obey an exponent-law dependent on this. The Pagano method is modified to be feasible for the study of FGPM sandwich cylinders. The modifications are as follows: a displacement-based formulation is replaced by a mixed formulation; a set of the complex-valued solutions of the system equations is transferred to the corresponding set of real-valued solutions; a successive approximation method is adopted to approximately transform each FGPM layer into a multilayered piezoelectric one with an equal and small thickness for each layer in comparison with the mid-surface radius, and with the homogeneous material properties determined in an average thickness sense; and a transfer matrix method is developed, so that the general solutions of the system equations can be obtained layer-by-layer, which is significantly less time-consuming than the usual approach. A parametric study is undertaken of the influence of the aspect ratio, open- and closed-circuit surface conditions, and material-property gradient index on the assorted field variables induced in the FGPM sandwich cylinders.     

Multispectroscopic DNA interaction and Docking studies

Two new water soluble oxovanadium(IV) complexes with formulae Na[VO(his)(met)SO₄] (1) and Na[VO(gly)(met)SO₄] (2), (gly=glycine his=histidine, and met=metformin) were synthesized and characterized by LCMS, UV‐Visible absorption, infrared spectra, magnetic moment, elemental analysis, thermal analysis and electronic spectral studies. The metal center was found in an octahedral geometry. DNA binding interaction of these complexes with CT DNA has been explored by UV‐Visible absorption, fluorescence, viscosity measurements and cleavage studies. Finally the binding of the complexes with CT‐DNA could be surface binding, mainly in the groove binding. The complexes were docked in to B‐DNA sequence, 5’(D*AP*CP*CP*GP*AP*CP*GP*TP*CP*GP*GP*T)‐3’ retrieved from protein data bank (PDB ID: 423D), using Discovery Studio 2.1 software.     

Application of a hybrid meshless technique for natural frequencies analysis in functionally graded thick hollow cylinder subjected to suddenly thermal loading

A hybrid meshless technique based on composition of meshless local Petrov–Galerkin method (for spatial variables) and Newmark finite difference method (for time domain) is developed for natural frequencies analysis of thick cylinder made of functionally graded materials (FGMs). The FG cylinder is assumed to be under suddenly thermal loading, axisymmetric and plane strain conditions. The dynamic behaviors and time history of displacements are obtained in time domain using Green–Naghdi (GN) theory of coupled thermo-elasticity (without energy dissipation). Using fast Fourier transform (FFT) technique, the displacements are transferred to frequency domain and all natural frequencies are illustrated for various grading patterns of FGMs. The variations of mechanical properties in FG thick hollow cylinder are considered to be in nonlinear volume fraction law through radial direction. The presented hybrid meshless technique furnishes a ground to analyze the effects of various grading patterns of FGMs on natural frequencies, which are obtained employing GN coupled thermo-elasticity governing equations. Also, the frequency history and natural frequencies are illustrated for various grading patterns at several points across thickness of cylinder.     

完备化Witt代数中自然出现的一些非有限阶化李代数的表示

讨论了完备化Witt代数的三类非有限阶化子代数的不可约非权模的实现,并利用它们的表示得到一些有趣的组合恒等式.     

分级纳米材料的结构、制备及其应用

纳米材料因其独特的表面效应、体积效应和量子效应等特点,在化工、生物工程、医学和能源等领域有着广阔的应用。 由简单的低维纳米结构作为主要的构建单元并按照特定的排列方式组装成规整有序的三维结构,即分级纳米结构,已经开展了许多的研究。 本文综述了分级纳米结构的制备方法和微观结构,及其在污水处理、超级电容器、太阳能电池以及光催化等领域的应用。     

Contact vibration analysis of the functionally graded material coated half-space under a rigid spherical punch

This paper studies the contact vibration problem of an elastic half-space coated with functionally graded materials (FGMs) subject to a rigid spherical punch. A static force superimposing a dynamic time-harmonic force acts on the rigid spherical punch. Firstly, we give the static contact problem of FGMs by a least-square fitting approach. Next, the dynamic contact pressure is solved by employing the perturbation method. Lastly, the dynamic contact stiffness with different dynamic contact displacement conditions is derived for the FGM coated half-space. The effects of the gradient index, coating thickness, internal friction, and punch radius on the dynamic contact stiffness factor are discussed in detail.     

Morita contexts and Galois theory for weak Hopf comodulelike algebras

We investigate the Morita context and graded cases for weak group corings and derive some equivalent conditions for μ to be surjective. Furthermore, we develop Galois theory for weak group corings. As an application, we give Galois theory for comodulelike algebras over a weak Hopf group coalgebra.     

An analytical study of the non-linear vibrations of cylindrical shells

The primary resonance response of simply supported circular cylindrical shells is investigated using the perturbation method. Donnell's non-linear shallow-shell theory is used to derive the governing partial differential equations of motion. The Galerkin technique is then employed to transform the equations of motion into a set of temporal ordinary differential equations. Considering only the primary resonance case, the method of multiple scales is used to study the periodic solutions and their stability. The necessary and sufficient conditions for appearance of the so-called companion mode are also discussed. To this end, a range of the possible multi-mode solution is obtained for response and excitation amplitudes and also excitation frequency as a function of damping, geometry and material properties of the shell. Parametric studies are performed to illustrate the effect of different values of thickness, length and material composition on the possibility of the companion mode participation in primary resonance response.     

Non-linear axisymmetric response of functionally graded shallow spherical shells under uniform external pressure including temperature effects

This paper presents an analytical approach to investigate the non-linear axisymmetric response of functionally graded shallow spherical shells subjected to uniform external pressure incorporating the effects of temperature. Material properties are assumed to be temperature-independent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. Equilibrium and compatibility equations for shallow spherical shells are derived by using the classical shell theory and specialized for axisymmetric deformation with both geometrical non-linearity and initial geometrical imperfection are taken into consideration. One-term deflection mode is assumed and explicit expressions of buckling loads and load-deflection curves are determined due to Galerkin method. Stability analysis for a clamped spherical shell shows the effects of material and geometric parameters, edge restraint and temperature conditions, and imperfection on the behavior of the shells.     

Thermal fracture of a functionally graded/homogeneous bimaterial with system of cracks

The thermal fracture of a bimaterial consisting of a homogeneous material and a functionally graded material (FGM) with a system of internal cracks and an interface crack is investigated. The bimaterial is subjected to a heat flux. The thermal properties of FGM are assumed to be continues functions of the thickness coordinate, while the elastic properties are constants. The method of the solution is based on the singular integral equations. For a special case where the interface crack is much larger than the internal cracks in the FGM the asymptotic analytical solution of the problem is obtained as series in a small parameter (the ratio between sizes of the internal and interface crack) and the thermal stress intensity factors (TSIFs) are derived as functions of geometry of the problem and material characteristics. A parametric analysis of the effects of the location and orientation of the cracks and of the inhomogeneity parameter of FGM’s thermal conductivity on the TSIFs is performed. The results are applicable to such kinds FGMs as ceramic/ceramic FGMs, e.g., TiC/SiC, MoSi₂/Al₂O₃ and MoSi₂/SiC, and also some ceramic/metal FGMs.